Auger Bucket

The Agriquip Auger Bucket can discharge a range of feed products for livestock. They are based around the standard 1.7m³ shell and can be set up to dispense cereal, nut and grain feed. The dispensing chute can be ordered to the left or right side of the bucket to suit your particular farm layout or preference.

The main auger bucket shell is constructed in 6mm thick steel, which is fully welded inside and out.

Agriquip will build your auger feed bucket to suit your existing agricultural plant. Whether you use a telescopic handler the appropriate mounting bracket is welded to the wrap around stiffeners rather than direct to the shell.

In keeping with the robust shell of the bucket, the auger flights are also constructed with 6mm thick steel, allowing them to handle almost all agricultural feedstuffs; with the EXCEPTION of silage, brewers’ grain or root cutting.

Please note that this bucket is not suitable for silage, brewers’ grain or root cutting.

Call Agriquip today to get hold of the animal feed solution you have been waiting for!

Dimensions

• One Piece Shell – 6mm thick
• 150 x 20mm -500 Brinell Wear Edge
• 50x15mm Flat Skids to the underside
• I/D – 76.1mm
• O/D – 285mm
• Thickness – 6mm
• Pitch – 172mm
• Shaft – 76.1 x 4 CHS
• Standard Width – 7’ 6” / 2300mm
• Standard Capacity – 1.7 cu/m
• Corner fillets
• Inboard Hydraulic Motor
• Auger flight – Standard – Mild Steel
• Stub shafts welded in both ends
• MSF 40 Bearings
• 315CC Hydraulic Motor
• 32mm Output Shaft
• Brackets to suit Telehandler / Tractor Loader
• Discharges Feed Products
• Not suitable for Silage or Molasses